Section 1 The function of the heald frame and the conditions it should meet
The heald frames of the loom drive the healds to form openings. The heald frames of shuttle looms are mostly made of wood or steel, while the heald frames of shuttleless looms are …
Section 2 Types and Technical Requirements of Heald Frames
1. Types of heald frames (1) According to the type of loom: heald frames for air-jet looms; heald frames for water-jet looms; heald frames for rapier looms; heald frames for projec…
Section 3 Structure and Selection of Heald Frames
1. The structure and basic dimensions of the heald frame (Figure 5-1, Figure 5-2) (1) The distance between the heald rods (heald frame and heald distance) H is determined by the di…
Section 5 Models and main technical specifications of heald frames
Common heald frames and main technical specifications are shown in Table 5-7. Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:
Section 4 Maintenance and management of heald frames
1. Maintenance of heald frames (1) Heald frames should be handled with care to avoid collisions. (2) The heald frame should be cleaned frequently to remove any debris on the heald …
Section 6 Manufacturers of loom heald frames
Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:Extended reading:
Section 1 The function of the heald rod and the conditions it should meet
The draw-in rod is a key part of the heald frame, which connects the healds or steel healds through the draw-in rod. 1. The role of the draw-in rod in the weaving process The draw-…
广告
Section 3 Use of Heald Rods
1. Use of O-shaped heddle threading rods(1) O-shaped heddle threading rods are mainly used for closed heddles or healds. (2) The O-shaped heald rod is used in conjunction with the …
Ring spinning process and top equipment manufacturers
Ring spinning process: Blowing—carding—drawing—roving—spun yarn—winding 1. Blowroom 1. Tasks of the blowroom (also known as blowroom) machine: 1). Ope…
Section 2 Types and Technical Requirements of Heald Rods
1. Classification of heddle rods (1) Classification according to the cross-sectional shape of the heddle rods: O-shaped; J-shaped; C-shaped (see Figure 6-1). (2) Classification acc…