Fabric News

Outdoor sports and leisure fabrics share the same life concepts advocated by current leisure life: comfort, health, and environmental protection. It can be said that outdoor sports…

The fabric of radiation-proof clothing is conductive, which is an important factor in achieving radiation shielding. The shielding effect of radiation-proof clothing with good fabr…

Looking back on 2014, the field of smart wearable devices has developed rapidly and has attracted widespread attention from the whole society. A large number of leading domestic an…

Waterproof streaks 1. Reason: ⑴Uneven pre-treatment and uneven dyeing. ⑵ Uneven rolling pressure causes uneven padding fluid. ⑶ The permeability of the working fluid is poor and th…

There are great changes in color and light 1. Reason: The main reason for the color change is the deepening effect of fluorine-containing resin. This is also a phenomenon that cann…

It feels bad 1. Reason The main reason is that a waterproof film is produced on the surface of the fabric and the fabric feels poor. 2. Main countermeasures: ⑴First of all, choose …

Blistering 1reason ⑴Whether it is easy to foam. Try to choose one with low foaming. ⑵ Residual surfactants (dispersing/leveling agents, reducing soaping agents, etc.) and alkali on…

Roller sticking phenomenon 1reason ⑴Continuously observe whether resin or viscous precipitation appears on the roll during processing. If it occurs, it will easily become a waterpr…

Green fabric is 27.9℃. After 10 minutes of irradiation, the temperature of the pink fabric remained unchanged, while the temperature of the green fabric rose to 29.9°C. The magic o…