In textile products, the main factors that affect the color fastness to wet rubbing include the type of fabric and fabric structure; textile pre-treatment, such as desizing, scouri…

许多人都看到过关于3D打印衣服的消息。理论上，使用3D打印技术是有可能制造出可穿戴的、舒适的衣物。但迄今为止，很多3D打印服装的舒适性与理想相差甚远，有些3D打印的衣服与其说是一块布，还不如说是中世纪的铠甲。 不过，英国一个研究项目Technical Crafting可能将3D打印服装的技术向前推进一步。该项目是由曼彻斯特艺术学院的两名研究人员Mark Be…

Defect form:</p There are regular stains on the fabric that are basically similar in shape or size, or irregular in shape and size, and are of the same color as the dyed fabric.…

Dyeing creases on knitted fabrics/Causes:</p 1. Cooling down too fast<br / 2.布匹和喷嘴匹配不好，车速流量控制不适合！~ 3. The best way to deal with the creases of heavy fabrics and fully lined e…

棉氨汗布在织造时没有发现异常．但在面料染色后出现部分氨纶断掉的现象解析 </p 一般有三种原因可能导致这个现象的出现，分别是原料问题、织造问题和染整问题。 </p 当染整后出现断氨纶现象时．要把布样拆散，仔细观察氨纶断裂处的形态。如果氨纶丝断点截面呈锯齿状．说明氨纶丝在染整前就受到损伤，染整过程中面料受力较大所以氨纶断裂：如果氨纶丝断点截面是球状…

The reasons are:</p ① Process formulation and operation issues:</p Unreasonable formulation process or improper operation will produce color flowers; </p <br / ② Equipm…

染色加工时，必须再现与上次相同的染色色相。由于加工时的季节性要素等，有时会引起水质以及气温等方面的差异，造成染色重现性的低下。 <br / 外界条件不安定时，选择使用不易受气温条件影响的温度依赖性小的染料，并且建议使用能缓解水质变化的助剂(金属螯合剂)。 </p 在染色时所使用的染料一般与上次染色所使用的属批不同，请注意染料批间的浓度差异。 &l…

Shrinkage is a phenomenon in which the length or width of textiles changes after washing, dehydration, drying and other processes in a certain state. The degree of shrinkage involv…

Scientists and engineers from the British company Tactile Navigation Tool invented a sensor vest that can sense objects and people around it. The vest uses a variety of high-tech s…