Sweatshirts are the most suitable item for autumn and winter because they look casual and fashionable. Autumn and winter are also the best seasons to buy sweatshirts. When we develop sweatshirts, in addition to paying attention to the style of the clothes, we must also pay attention to the quality of the clothes. Learn this knowledge and earn more repeat customers and good reputation!

Let’s first learn about sweatshirt fabric

Sweatshirt fabric

Sweatshirt fabric is a kind of knitted fabric, English is French
terry,
After pulling the hair, it is called fleece. This type of knitted fabric is mostly made of displacement yarn, so it is called displacement fabric or sweatshirt fabric. In some places it is called terry cloth, and in other places it is called fish scale cloth. There are many varieties. (Fish scale cloth is named because the back of the cloth is terry cloth, and some of them look like fish scales.) The weight is generally 190g/M2 -350g/M2.

Can be divided into:

1. Generally, those under 250g are called small sweatshirts in the market, and some people call them sweatshirts. Yes, some people call it a single sweatshirt. Because it is woven from a single yarn, it is relatively thin compared to this type. The loops of a small sweatshirt are smaller and are called small terry cloth

2. The ones weighing more than 280g are called big sweatshirts in the market, and some people call them double sweatshirts because they are made of two yarns or even It is woven with three yarns, so this kind of cloth is relatively thick. The loops of the David’s coat are obviously larger, so people call them big loops.

On the terry surface on the back side, you can also scratch the hair. Some people say it is brushing, others say it is called drawing hair, and there is also called pulling hair, which means the same thing, but in different places Different names. This kind of fleece fleece will be thicker and warmer than the original terry cloth without fleece. This kind of cloth is generally around 280g-320g.

Can be divided into:

1. Cotton (100% cotton)

2. CVC (cotton-polyester, containing more than 60% cotton)

3. TC/AB (containing about 30% cotton)

4. Full polyester (100% polyester)

If they are made of the above four ingredients, then these sweatshirts are Not elastic. Stretchy sweatshirts are made with spandex, that is, pure cotton, CVC, TC/AB, and pure polyester are basically made with spandex added (market name: stretch/densified). After adding this, the fabric of the sweatshirt becomes elastic. , the spandex component generally accounts for 5% of the entire cloth.

Sweatshirts/terry fabrics/fish scale fabrics with spandex added can be divided into

1. Cotton stretch racks Sweatshirt/terry cloth/fish scale cloth

2.CVC stretch pullover sweatshirt/terry cloth/fish scale cloth

3 .TC/AB stretch stretch sweatshirt/terry cloth/fish scale cloth

4. Full polyester stretch pull sweatshirt/terry cloth/fish scale cloth

But the pilling of sweatshirts is a very annoying problem. After all, when clothes pill, they will look very cheap and very low-grade. And wearing it can also cause a bad mood.

I believe we have encountered this situation in our daily lives.

Why do clothes pill?

There are three main reasons for fabric pilling:

1. Pilling due to fabric characteristics.

Different fabrics have different pilling difficulties. Fiber properties have a great influence on fabric pilling. Fiber length, fineness, shape and Surface properties also have a greater impact on fabric pilling. In contrast, fine fibers are easier to pill than coarse fibers, and blended fibers are easier to pill than other fibers.

2. Friction and electrostatic pilling.

Some chemical fibers have poor hygroscopicity and are prone to generate static electricity during drying and continuous friction. Static electricity causes the hairiness on the surface of short fiber fabrics to stand upright, thus creating conditions for pilling. . For example, the static electricity of polyester can easily attract foreign particles and cause pilling.

3. Improper pilling during washing.

If the washing time is too long, it will easily cause fabric fiber damage, fiber breakage, and increase the possibility of pilling; the washing temperature is too high (suitable temperature is 20 to 45 degrees), and the washing temperature will be too high. Wrong detergent (it is recommended to use neutral detergent) may cause pilling.

The necessary condition for pilling is that the fiber must have enough strength to support pilling. Cotton and fine wool will break and fall off during the pilling stage, and there is a chance of pilling. rare. The situation is different for chemical fibers. Polyester or acrylic are very stubborn. They will fluff first, then pill, and then you have to cut off the pills. Pilling of clothes is affected by the characteristics of the fabric and cannot be avoided, but the degree can be controlled. Fine fibers are easier to pill than coarse fibers, and blended fibers are easier to pill than other fibers. For example, a garment made of a blend of chemical fiber and cotton fiber is more likely to pill than a pure cotton garment.

Solution

The fundamental solution is that when purchasing sweatshirt fabrics, it is not easy to choose from the fabrics. Ball clothes, such as clothes made of natural fiber fabrics, such as pure cotton, silk, cashmere, etc. Pure natural wool is the best, but it will be more expensive and has higher warmth and softness.

Pure cotton sweatshirts feel better, the texture looks better, and they are comfortable to wear.��Comfortable, very soft, and also very sweat-absorbent.

These sweatshirt cleaning and maintenance tips

Also remember to remind customers~

Ordinary cleaning:

The water temperature should not be higher than 25 degrees. It is best to wash with cold water and must be washed by hand. Try to use neutral detergent for cleaning. If you find it difficult to remove the detergent residue, you can put some vinegar in the water, so that you can easily remove the stains. When washing, do not scrub the collar and cuffs too much to avoid deformation of the collar and cuffs.

Print cleaning:

Print items should not be soaked in water for too long, and do not rub the outside of the sweatshirt pattern with your hands. , do not use detergents containing bleach, use neutral detergents as much as possible. All printed items should not be washed in a washing machine as much as possible. It is recommended to wash them by hand. If the printed pattern on the clothing is stained, please soak it in washing powder and water for a few minutes, and then clean it with a brush (preferably a soft-bristled brush). It is not advisable to brush hard to avoid damaging the fabric fibers and affecting the luster of the printed pattern. Printed objects cannot come into contact with solvents, acids, alkali, oil and other corrosive substances.

Drying method:

1. After washing, the clothes should be dried naturally and squeezed with water by hand. Just fine. Do not wring it with your hands, do not spin it in a clothes dryer, and printed items should not be bleached or dried.

2. If the clothes need to be ironed, use medium-temperature steam to iron them after drying, and try to avoid the pattern part with the iron. If the pattern needs to be ironed, the temperature of the iron should not be higher than 80 degrees. Please do not place the iron directly on the pattern. It is best to block a piece of cloth in the middle before ironing.

Storage skills:

1. When putting away clothes after washing, do not stuff the clothes into a narrow space. Use hangers. Hang or lay flat to keep the garments in a flat shape.

2. It is best to hang the clothes on hangers in the wardrobe, or fold the clothes and put them in the cabinet.