Buy Fabric Fabric News Clean room FFU filter membrane for atmospheric dust removal

Clean room FFU filter membrane for atmospheric dust removal



With the development of the economy and the improvement of living standards, people have higher and higher requirements for product quality. Production technology and production en…

With the development of the economy and the improvement of living standards, people have higher and higher requirements for product quality. Production technology and production environment determine the quality of products, which forces manufacturers to pursue better production technology and more advanced products. High production environment, clean room FFU filter membrane has solved this problem for the majority of manufacturers.

However, because polytetrafluoroethylene is expensive and has lower strength than steel, it is generally made into linings, sealing materials and filling materials, and is protected and reinforced by a metal shell to form a whole.

In this way, the lining layer can resist corrosion and high and low temperatures, and the outer shell can withstand pressure and has sufficient strength and stiffness, which can reduce the overall cost.

Such as: corrosion-resistant pipes, containers, pumps, valves, radar, communication equipment, etc.

The clean room FFU filter membrane is an asymmetric membrane, and the micropore sizes are different on the front and back sides of the membrane.

The cross-sectional micropore size of the membrane is larger than the micropore size on its surface, and the vertical and horizontal micropore sizes are also different, with the longitudinal micropores being larger than the transverse ones.

Using the unique node fibrillarity, smooth surface, chemical resistance, air permeability and water impermeability, large air permeability, flame retardant, high temperature resistance, strong acid and alkali resistance and other characteristics of the ptfe filter membrane, it can be used for atmospheric dust removal, air purification, etc. .

It is a manufacturer of polytetrafluoroethylene microporous membranes that specializes in R&D, production and sales.

The clean room FFU filter membrane products produced by our company are all made of imported raw materials, with high uniformity, stable performance and good air permeability.

It also has high filtration efficiency and can meet the filtration efficiency level requirements of sub-high efficiency, high efficiency and ultra high efficiency filters.

</p

This article is from the Internet, does not represent 【www.buyfabric.net】 position, reproduced please specify the source.https://www.buyfabric.net/archives/39152

Author: clsrich

 
TOP
Home
News
Product
Application
Search